Blueair Image
Cabin support

All the topics, resources and guides you need for your Cabin air purifier.

FAQs
For information about the availability of the purifier, please contact your local dealer.
Yes, but to be able to connect your app, mobile data needs to be activated on the phone.
The fan speed can be increased according to User Manual, if this is not possible, please contact Customer Support.
  • Check that the control plug is connected to the 12V outlet.
  • Check that you have turned on the car’s ignition.
  • Check that the top cover is mounted correctly.
  • Turn on your P1 by pressing the control plug/ Turn on your P2i by flicking (rotating) the control plug once to the right or to the left.
  • See User Manual for more information.
Our recommendation is that you always have your Cabin air purifier active while being inside of the cabin.
You place the filter with the printed side up according to the instructions in the User Manual.
Factors such as the level of pollution in the air and the amount of time that your Cabin air purifier is active impacts filter lifespan. The control plug will indicate when it is time for you to exchange your filter. The average filter lifespan is 6 months. Read more
The fan speed can be changed according to the User Manual. If this is not possible, contact Customer support.
Cabin air purifiers deliver best-in-class air purification performance for cars, truck and RVs, with a compact, mobile version of Blueair’s HEPASilent™ technology. Pioneered by Blueair, it combines electrostatic and mechanical filtration to deliver low noise, 360° air flow and high CADR. It provides more than 95% filtration efficiency against PM 2.5, pollen, dust, yellow dust and industrial emissions and has been tested to meet or exceed global standards.
When the Cabin air purifier unit is connected via the control plug in the 12V output, the filter is in position and the top cover is secured, a blue LED lights up on the control plug and on the unit, indicating that the unit is working.
Check the User Manual for instructions regarding changing the filter.
  • If you have a P1 unit, it is not a connected device.
  • If you have a P2i and it does not connect, try shutting it off and restarting the device. If this does not work, please contact Customer Support.
Yes, you can connect several accounts, but only one Bluetooth connection at a time is possible.
With Cabin Air Purifiers for your car, truck or RV, you can eliminate in-car air pollution so you and your passengers can always breathe pure, fresh air – even when stuck behind a bus in bumper-to-bumper traffic. Cabin Air Purifiers purifies the air inside your vehicle in less than six minutes, and since fresh air keeps you more energized and alert, Cabin Air Purifier also helps you drive more safely.

If 6 red LEDs are shown, this is a filter change indication. It is time to change the filter, read more about what to do in the User Manual.

If 3 red LEDs are blinking, this is a notification or error, read more about what to do in the User Manual.

The user manual can be found on the Blueair homepage. If you have trouble finding the user manual, please contact your closest Customer Experience team.
Yes, but the effect of the unit might not be as high as promised since air purifiers are more efficient in closed spaces.
You can find your serial number and/or MAC address on a label on the backside of your unit.
Position the Cabin air purifier and route the cables so that they do not get tangled or are in the way for the passengers or driver of the car. Check the user manual for advice for best cable routing.
  • Check that the control plug is connected to the 12V outlet.
  • Check that you have turned on the car’s ignition.
  • Check that the top cover is mounted correctly.
  • Turn on P1 by pressing the control plug/ Turn your P2i by flicking the control plug right or left once.
  • See User Manual for more information.
Your Cabin air purifier should be placed in your vehicle, behind a headrest or on top of the center console. For a more detailed explanation, please refer to the instructions in the User Manual.
No, the purifier will switch off with the car engine since the product uses the 12V outlet.
Use both your hands and press the two release buttons on the sides of the unit. The top will come loose, and you can easily lift and replace the filter. Refer to your user manual for more details.
Remove the filter and put it back in again, if the noise is still present, contact your point of purchase.
Yes, the unit works without Bluetooth, but Bluetooth is needed to connect the unit with the app.
Blueair Cabin: Tutorial
Cabin: Tutorial
Blueair Cabin: How it works
Cabin: How it works
Cabin user manuals

Say hello to Blueair

Email Phone

+8801841100456

Fax

Hours

Monday - Friday

08:00 - 17:00

With the exception of public holidays

Find more ways to contact us
Blueair null