Arrow - Left Back to 3 in 1

Why is the Heat Mode not functioning on my 3 in 1?

When heating mode is enabled, the heater will turn on/off depending on the target temperature that is displayed on the device interface.

  • If the target temperature is set below the ambient temperature of the room, the heater will not turn on (for example the room ambient temperature is 74°F and the setpoint temperature on the device is 70°F).
  • If the ambient temperature of the room is below the target temperature the heater will turn on until the temperature of the room reaches the target.
  • Once the target temperature is achieved the heater will turn off until the ambient temperature drops below the target again.

To set a target temperature, press the heating button on the device interface, wait for the toggles to flash then press the toggles up/down until the desired target is displayed. After 3 seconds the target temperature will be set.

When heating mode is enabled, the device will always work toward the target temperature regardless of the sub mode (i.e. fan speeds 1-4 or auto mode).

When auto mode is enabled with heating mode, the device will increase fan speed to achieve the target temperature more quickly.

Not finding what you need? We can help.

Contact Support Arrow - Right