Add to cart options
Filters the air at a rate of approx. 5x an hour (or about every 12 minutes) in a 674 ft² room to effectively lower particle levels and help maintain a comfortable environment in your oversized family room, basement, or open concept area.
Only Protect air purifiers provide 24/7 removal of viruses and bacteria with GermShield™ technology.¹ When on standby, the patent-pending GermShield technology proactively monitors your room and removes² viruses and bacteria on the filters using low air draft and plasma charging. A gentle stream of air then ensures no new growth of germs.
¹24/7 protection refers to the key function of GermShield technology, that is activated when the unit is in standby mode. Tested on Staphylococcus Albus and MS2 bacteriophage (deactivation) and E. coli (growth prevention).
HEPASilent Ultra™ is our most advanced filtration technology ever. This patent-pending technology combines electrostatic and mechanical filtration to remove 99.97% of viruses and bacteria,³ dust, pollen, dander and mold,⁴ and traps VOC and odors. Once caught in the filter, this unique technology then removes 99%⁵ of germs.⁰
HEPASilent Ultra delivers 50% more clean air,⁶ uses 55% less energy and has a 10% lower noise than traditional true HEPA filtration.
Through its unique combination of high airflow and electrostatic charging, HEPASilent Ultra technology removes 99% of germs caught on the filter.⁸ GermShield technology proactively monitors room conditions and activates to remove germs and prevent growth on the filter,⁵ when on standby.
Blueair purifiers are not tested against SARS-CoV-2 (COVID-19).
Verifide by the Association of Home Appliance Manufacturers (AHAM) for performance and Clean Air Delivery Rate (CADR).
Rated as an energy-efficient air purifier by the EPA's ENERGY STAR rating program.
Certified for ozone emissions and electrical safety by the California EPA's Air Resources Board (CARB).
Unlike other air purifiers, the unique SpiralAir outlets deliver more⁹ clean air to every corner of the room.¹⁰
The SmartFilter has a smart RFID chip that proactively monitors real-time usage and accurately judges when you need to replace it, with a maximum of 1-year lifetime.
Advanced sensors keep track of the levels of coarse particles (PM10) like dust, pollen, mold spores, and ash and fine particles (PM2.5 and PM1) like smoke, viruses, and bacteria.⁰ If pollutant levels creep up, the Blueair app will track the air purifier's progress with real-time “ETA” updates until air is clean.
Feature can only be enjoyed with the Blueair app.
The standard display (10i models) provides at-a-glance updates on particle (left) and gas levels (right) via the LED air quality indicator (AQI). Five colors represent current conditions ranging from red (very polluted) to blue (excellent) to easily keep you up to date on your indoor air.
The Blueair app allows you to monitor your home's air quality and adjust the settings remotely with your smartphone, tablet, Alexa, or Google Assistant enabled device.
Orders ship free and typically arrive within 5 business days in most states. Charges may be incurred for Alaska and Hawaii.
Breathe easy with a 60-day in-home trial period. If you're not happy, we'll help arrange for a free return.
Guarantee clean air for years to come by extending your 1-year warranty coverage for up to 5-years.
In Auto mode, the Protect air purifier automatically increases fan speed when pollution levels rise and slows it down when the air is clean again.
Hidden wheels allow you to easily move the air purifier anywhere in the room, and the cord can be adjusted to the perfect length with a convenient winder.
Completely filters room air at the industry recommended rate of 5x an hour to effectively lower particle levels (rooms up to 62 m²).
Wi-Fi connectivity for remote controlYes
On/off timerYes (via Blueair App)
Filter replacement indicatorYes
Speed control options1 - 2 - 3 - AUTO - NIGHT
Integrated air sensorsYes
Dimensions(HxWxD)33.9 x 13.4 x 13.4 in
Energy consumption8 - 76 Watts
Sound level25 - 53 dB(A)
Recommended filter changeEvery 6 – 12 months depending on your environment (your unit will let you know)
Recommended room size674 ft2
Air changes per hour (ACH)4.8
Clean air delivery rate (CADR) - Pollen435 cfm
Clean air delivery rate (CADR) - Dust>400 cfm
Clean air delivery rate (CADR) - Smoke435 cfm
Number of filters1
Guarantee clean air for years to come with extended warranty coverage when you register your air purifier.
The technology used in Protect™ air purifiers is the combination of the HEPASilent Ultra™, Germshield™ and SpiralAir technologies™.
HEPASilent Ultra™ is a combination of mechanical and electrostatic filtration, which ensures particle removal and gas reduction. Compared to the HEPASilent technology (used with Blueair Classic and JOY air purifiers), the new Ultra™ technology combines an optimised fan system, engineered in Sweden by Blueair, optimised electrostatic filtration and an improved filter.
Germ growth may happen when temperature and humidity levels are high. The Germshield™ functionality is designed to prevent germ growth inside the air purifier when the air purifier is not in use.
Three airflow speeds, Automode, Germshield™, Connection with Blueair app (see WiFi and Blueair app FAQ for more information), Indoor air quality indications on the air purifier, Filter change indicator.
The Blueair SmartFilter is the only filter available for the Protect™ air purifiers.
It consists of two filters attached by a strap at the top. Each filter has a particle filter media and activated carbon.
The Protect™ air purifiers also have two pre-filters that can be cleaned with a dust cloth or by using the soft brush of a vacuum cleaner.
Blueair’s product claims are derived from innovative tests developed and executed by professionals. Here, the SARS-CoV-2 testing conducted on the Health Protect 7400 was limited to measuring only the air purifier’s ability to remove the SARS-CoV-2 virus from a 13 ft3 controlled test chamber. The test did not measure whether once the virus was captured by the air purifier if it was deactivated or killed, or whether the air purifier was able to prevent transmission of the virus from person to person. Blueair is committed to transparency and veracity in making our claims, which is why we provide clarifications to ensure our products and our testing are accurately represented.
Per the CDC’s recommendation, improving indoor air quality and ventilation can reduce the exposure to and transmission of COVID-19. An air purifier can play a vital role to improve air ventilation but cannot offer complete protection on its own. We recommend following CDC guidelines for a layered approach, including using air purifiers to aid in improving air ventilation as part of your tool kit to combat COVID-19.
¹24/7 protection refers to the key function of GermShield technology, that is activated when the unit is in standby mode. Tested on Staphylococcus albus and MS2 bacteriophage.
²Deactivation of bacteria (Staphylococcus albus) and virus (MS2 bacteriophage).
³Based on third-party testing, using GB/T18801-2015 test standards on airborne viruses and bacteria (H1N1, Staphylococcus aureus, and Escherichia coli).
⁴Based on third-party testing of removal rate of fine particles according to GB/T18801-2015 standard and pollen removal rate according to AHAM AC/1-2019 standard.
⁵Deactivation of germs on natural flora (excluding viruses)
⁶Based on testing of particle Clean Air Delivery Rate (pCADR according to GB/T18801-2015) in Protect 7400 model at the same fan speed, compared to using H13 true HEPA filtration in the same unit.
⁷Based on testing of energy consumption (W) and noise levels (dB, according to ISO 3743) in Protect 7400 model with the same particle Clean Air Delivery Rate (pCADR according to GB/T18801-2015), compared to using H13 true HEPA filter in the same unit
⁸Deactivation of germs within natural flora (excluding viruses) under normal temperature and humidity conditions.
⁹HEPASilent technology combines mechanical and electrostatic filtration to provide a higher particle Clean Air Delivery Rate (pCADR) than conventional methods of only using mechanical filtration (at the same rpm on the fan and energy consumption of 18.3W). Based on particle CADR tests according to GB/T18801-2015 standard.
¹⁰Based on the recommended room size of 674 ft²
¹¹Compared to incandescent lightbulb.
¹²Based on testing of noise levels (dB, according to ISO 3743) in Protect 7700 model.