All the topics, resources, and guides you need for Blueair filters.
First few times you use your air purifier
As with any new device, an air purifier can release a ’newness’ smell. Don't worry, this odor is not dangerous or toxic! Run your air purifier non-stop for a few days and the odor should dissipate.
For optimal use, keep the air purifier on at all times. It uses less energy than a low-energy light bulb.
Time to change the filter?
A dirty filter can release a dusty smell. Filters absorb odors from, for example, cooking. To avoid this, always replace the filter when indicated.
Make sure that you have removed the plastic cover from the filter (not applicable to all models and filters).
Make sure that nothing blocks the air inlet and outlet.
Make sure that no object or dust is clogged around the filter. If there is, remove the filter and clean the purifier with a vacuum cleaner.
To remove the filter(s) to see if it is causing the noise:
- Turn off your air purifier and unplug it.
- Remove the filter(s).
- Plug in the unit and turn it on. If the noise disappears, install a new filter. If the noise is still there, please contact the retailer where you bought the air purifier. They will help you according to their warranty conditions.
You can find instructions for the filter replacement timer in the user manual provided with your unit. All user manuals are available online under our Customer Support section.
Filter reset for Connected Classic series (Classic 200/400/500/600 series)
After 6 months of continual use, the filter replacement indicator will turn orange and you will be notified by the Blueair Friend app that it is time to replace the filter.
To reset the Classic series filter timer, switch on the unit and press and hold the filter replacement button for 10 seconds until the light disappears.
Filter reset for Blue series (Blue 121, 211, 211+, 411, etc.)
Turn on the unit and press and hold the main button for 10 seconds until the light disappears.
Filter reset for Sense, Sense+, Pro
When the red circle on the display is shown, it is time to replace the filter. To reset the filter timer, switch on the unit and hold your finger on the red circle until it disappears.
Filter reset for Classic E-series (models 270E, 450E, 550E, 650E, etc.)
To reset the filter timer, press and hold the RESET or TIMER button for 10 seconds. The filter timer light goes out and the counter starts counting again. To pause the filter timer light for five days, press the SNOOZE button.
Blueair recommends a filter change every six months. The light on your filter timer will indicate when it is time to replace your filter after six months of continual use.
If you use your unit in a highly polluted environment, you need to change it more often. To ensure the unit’s high-quality performance, we recommend that you only use genuine Blueair filters.
Blueair filters cannot be cleaned or washed. They need to be replaced every 6 months. Please check your user manual to see replacement indications for your model. All user manuals can be found in our Customer Support section.
Blueair pre-filters can be vacuumed or cleaned with your laundry (30 or 40 degrees maximum). The pre-filter is the colored textile filter that you place on the outside of your unit (only available for the Blue Pure series).
Say hello to Blueair
+632 8821 2275
1028 Arnaiz St, Pasay Road Makati City (beside Western Appliance).
Monday - Sunday 10:00 - 19:00
Shangri-La Showroom (inside GE Monogram)
Monday - Sunday 11:00 - 19:00
Level 4, Shangri-La Plaza, EDSA Mandaluyong City
+632 8643 3456