Blue 3610

Completely filters air in a 51m² room every 12.5 minutes or a 122m² room every 30 minutes.
Blueair AHAM Verifide
Blueair Image
Blueair Image
Designed for large rooms

Filters the air at the industry-recommended rate of 4.8x an hour (or about every 12,5 minutes) in a 51 m² room to effectively lower particle levels and maintain a comfortable environment in large living rooms, family rooms & playrooms.​

Blueair Image
The secret behind powerful filtration

Our unique combination of electrostatic and mechanical filtration that we call HEPASilent™ filtration technology sets us apart. The combination allows us to use filters that are less dense and require less air pressure than traditional HEPA filters without a loss in performance— resulting in quieter and more energy efficient air purifiers.

Blueair Image
Clean air at the touch of a button

The one-touch enabled Auto mode is designed to help you maintain a comfortable home environment. When enabled, the setting automatically adjusts fan speed based on real-time conditions reported by the integrated particle sensor. Stay up to date on your air quality with the LED display; it changes color to indicate good, moderate, or poor.

Blueair image of particle being trapped by filter fibers
Removes 99,9% of airborne Coronavirus in a laboratory environment*

Blue air purifier

* Blue 3610 tested in a 0,37m³ chamber by an independent third-party laboratory. Not proven to kill SARS-CoV-2 or reduce or prevent COVID-19 transmission.

Blueair Image
LED air quality display

Stay up to date on the status of your indoor air with the LED air quality indicator (AQI). The display changes color to indicate good, moderate, or poor based on the current concentration of fine particles (PM2.5) measured by the integrated particle sensor. 

Blueair Image
One-button design

Forget about adjusting settings and knobs - a single button controls it all and lets you know when it's time to replace the filter. After about 7 seconds, the button's LED light automatically dims to 0% brightness.

Blueair Image
Easy filter change

The built-in LED warning system glows red when it's time for a change. For optimal performance, we recommend replacing the filter about every 6 months when used 24 hours a day.

  • Wi-Fi connectivity for remote control
    No
  • On/off timer
    No
  • Filter replacement indicator
    Yes
  • Speed control options
    1 - 2 - 3 - AUTO - NIGHT
  • Wheels
    No
  • Integrated air sensors
    Yes, particle sensor

Included in Box

  • Blue 3610 air purifier
  • Combination Particle + Carbon Filter
  • Pre-filter in Arctic Trail
  • Instruction manual
  • Filter Type
    Particle filter + Carbon sheet. Activated coconut shell carbon. Non-woven gradient Polypropelyne fibers. Free of chemicals and binders. Fiber shedding resistance.
  • Dimensions(HxWxD)
    522 x 330 x 330 mm
  • Product weight
    6.5kg
  • Energy consumption
    4-38 W
  • Sound level
    23 - 56 dB(A)
  • Air outlet
    Top
  • Air inlet
    360°
  • Filter recycling
    Plastic. Check your local recycling requirements for carbon.
  • Recommended filter change
    6 months (4,380 hours) when used 24 hours a day
  • Recommended room size
    51 m2
  • Air changes per hour (ACH)
    4.8
  • Clean air delivery rate (CADR) - Pollen
    650 m³/h (380 cfm)
  • Clean air delivery rate (CADR) - Dust
    590 m³/h (347 cfm)
  • Clean air delivery rate (CADR) - Smoke
    600 m³/h (353 cfm)
  • Number of filters
    1

Guarantee clean air for years to come with extended warranty coverage when you register your air purifier.

How does this model differ from the Blue Pure 221?

The Blue Pure 221 model has many similar features, but the 3610 is recommended for a larger room size of up to 51 square meters.

I've replaced my filters, now how do I reset the filter replacement indicator?​

Press and hold down the LED button for 10 seconds to reset the replacement filter indicator. ​​

How do I register for warranty?

To extend the Limited Warranty from one year to two (2) years, simply complete the product registration form in the 'My Units' section of your customer account, within (60) days of purchase or register through the Blueair mobile app.​

How should I clean the fabric pre-filter?

Vacuum the exterior of the fabric pre-filter to remove dust as often as you'd like. When the pre-filter requires a deeper clean, it can be washed on a gentle, low temperature cycle in the washing machine.

Why is my LED yellow?

The LED indicator will turn yellow after 5 months of operation to warn that it's almost time to change the filter. When the indicator light turns red (one month later), it’s time to change the main filter.