Stay up to date on the status of your indoor air with the LED air quality indicator (AQI). The display changes color to indicate good, moderate, or poor based on the current concentration of fine particles (PM2.5) measured by the integrated particle sensor.
Forget about adjusting settings and knobs - a single button controls it all and lets you know when it's time to replace the filter. After about 7 seconds, the button's LED light automatically dims to 0% brightness.
The built-in LED warning system glows red when it's time for a change. For optimal performance, we recommend replacing the filter about every 6 months when used 24 hours a day.
-
Wi-Fi connectivity for remote controlNo
-
On/off timerNo
-
Filter replacement indicatorYes
-
Speed control optionsAUTO- 1-2-3
-
WheelsNo
-
Integrated air sensorsYes, particle sensor
-
Filter TypeParticle filter + Carbon sheet. Activated coconut shell carbon. Non-woven gradient Polypropelyne fibers. Free of chemicals and binders. Fiber shedding resistance.
-
Dimensions(HxWxD)20.5 x 10.2 x 10.2 in
-
Product weight6.8lbs
-
Energy consumption3-35 W
-
Sound level23-53 dB(A)
-
Air outletTop
-
Air inlet360°
-
Filter recyclingPlastic. Check your local recycling requirements for carbon.
-
Recommended filter change6 months (4,380 hours) when used 24 hours a day
-
Recommended room size388 ft2
-
Air changes per hour (ACH)4.8
-
Clean air delivery rate (CADR) - Pollen244 cfm
-
Clean air delivery rate (CADR) - Dust250 cfm
-
Clean air delivery rate (CADR) - Smoke250 cfm
-
Number of filters1
Guarantee clean air for years to come with up to 2-years of warranty coverage when you register your air purifier.
With many of the same features of the 411 Auto model (Auto mode, integrated particle sensor, LED air quality indicator),the 311 Auto differs in its slightly larger size, larger recommended room size (up to 388 ft²), and higher Clean Air Delivery Rate (CADR).
Press and hold down the LED button for 10 seconds to reset the replacement filter indicator.
To extend the Limited Warranty from one year to two (2) years, simply complete the product registration form in the 'Warranty' section of your customer account, within (60) days of purchase or register through the Blueair mobile app.
Vacuum the exterior of the fabric pre-filter to remove dust as often as you'd like. When the pre-filter requires a deeper clean, it can be washed on a gentle, low-temperature cycle in the washing machine. Hang to dry.
The LED indicator will turn yellow after 5 months of operation to warn that it's almost time to change the filter. When the indicator light turns red (one month later), it’s time to change the main filter.
The integrated particle sensor measures the concentration of fine particles (PM2.5) in your indoor air. The LED air quality indicator (AQI) display uses a three-color scale to represent current PM2.5 concentrations as good (blue), moderate (yellow), or polluted (red).
The lights on the LED touch-button indicate the selected fan speed setting. Touch once to set to Auto mode (all three LED lights lit). Press twice for the lowest fan speed (top right LED lit), three times for medium (bottom LED lit), four times for high (top left LED lit). Press a fifth time to turn the air purifier off (no LEDs lit).
You'll notice that after about 5 seconds, the LED lights on the touch-button dim down to 0% brightness. To change speed settings, you'll need to tap the button once to 'wake up' the air purifier and then cycle through settings.