$339.99

Blue Pure 211+ Auto

Completely filters air in 550 ft² room every 12 minutes

$339.99

Free Shipping | Free 60-day Return | Up To 2-Year Warranty

Blueair
Blueair
Designed for large rooms

Filters the air at a rate of about 5x an hour (or about every 12 minutes) in a 550 ft² room to effectively lower particle levels and help maintain a comfortable environment in your large living room, family room, or playroom.

Blueair
Clean air at the touch of a button

The one-touch enabled Auto mode is designed to help you maintain a comfortable home environment. When enabled, the setting automatically adjusts fan speed based on real-time conditions reported by the integrated particle sensor. Stay up to date on your air quality with the LED display; it changes color to indicate good, moderate, or poor.

Blueair
Three-part filtration

A fabric pre-filter offers the first layer of protection, catching large particles and extending the life of the primary filter. The combination Particle + Carbon Filter uses a layer of activated carbon to filter light household odors from pets, cooking, and smoking, while the main particle filter removes airborne particles, like pollen, dust, pet dander, and more.

Blueair

Verifide by the Association of Home Appliance Manufacturers (AHAM) for performance and Clean Air Delivery Rate (CADR).

Blueair

Rated as an energy-efficient air purifier by the EPA's ENERGY STAR rating program.

Blueair

Certified for ozone emissions and electrical safety by the California EPA's Air Resources Board (CARB).

Blueair
The secret behind powerful filtration

Our unique combination of electrostatic and mechanical filtration that we call HEPASilent™ filtration technology sets us apart. The combination allows us to use filters that are less dense and require less air pressure than traditional HEPA filters without a loss in performance— resulting in quieter and more energy efficient air purifiers.

Additional features
Blueair
LED air quality display

Stay up to date on the status of your indoor air with the LED air quality indicator (AQI). The display changes color to indicate good, moderate, or poor based on the current concentration of fine particles (PM2.5) measured by the integrated particle sensor. 

Blueair
One-button design

Forget about adjusting settings and knobs - a single button controls it all and lets you know when it's time to replace the filter. After about 7 seconds, the button's LED light automatically dims to 0% brightness.

Blueair
Easy filter change

The built-in LED warning system glows red when it's time for a change. For optimal performance, we recommend replacing the filter about every 6 months when used 24 hours a day.

  • No
  • No
  • Yes
  • AUTO- 1-2-3
  • No
  • Yes, particle sensor

Included in Box

  • Blue Pure 211+ Auto air purifier
  • Combination Particle + Carbon Filter
  • Pre-filter in Arctic Trail
  • Instruction manual
Specifications
  • 20.5 x 13 x 13 in
  • 12.5lbs
  • 4-38 W
  • 23 - 56 dB(A)
  • Top
  • 360°
  • 550 ft2
  • 5
  • 380 cfm
  • 347 cfm
  • 353 cfm
  • 1
Warranty

Guarantee clean air for years to come with up to 2-years of warranty coverage when you register your air purifier.

FAQ
How does this model differ from the Blue Pure 211+?

The upgraded, Auto version of the Blue Pure 211+ model features an integrated particle sensor, intuitive Auto mode setting, and 3-color LED air quality indicator. The newer model also differs in its slightly larger recommended room size of 550 ft², slightly higher smoke (353 cfm) and pollen (380 cfm) Clean Air Delivery Rate (CADR), as well as lower noise levels (23-56 dB) and energy consumption (4-38 W).

I've replaced my filters, now how do I reset the filter replacement indicator?​

Press and hold down the LED button for 10 seconds to reset the replacement filter indicator. ​​

How do I register for warranty?

To extend the Limited Warranty from one year to two (2) years, simply complete the product registration form in the 'Warranty' section of your customer account, within (60) days of purchase or register through the Blueair mobile app.​

How should I clean the fabric pre-filter?

Vacuum the exterior of the fabric pre-filter to remove dust as often as you'd like. When the pre-filter requires a deeper clean, it can be washed on a gentle, low-temperature cycle in the washing machine. Hang to dry.

Why is my LED yellow?

The LED indicator will turn yellow after 5 months of operation to warn that it's almost time to change the filter. When the indicator light turns red (one month later), it’s time to change the main filter.