How do I connect the device using manual mode?

Classic

1. Unplug the Blueair Classic unit and plug it back again.

2. Set the unit to manual mode:

a. Open the flip top lid and press the Wi-Fi symbol on the display for three seconds.

b. Wait until the Wi-Fi symbol is blinking and press it again for three seconds.

When the Wi-Fi symbol is pulsing, the Blueair Classic is in manual mode.

3. On your smartphone, navigate to 'Wi-Fi settings'. Wait for the network 'classic-config' to show. Connect to it.

4. Return to the Blueair Friend app and follow the guided process.

5. When the app asks you to connect your Blueair Classic to a Wi-Fi network, fill in the name and password of the Wi-Fi network that you want to connect your Blueair Classic to.

When the LED light is solid, your Blueair Classic is connected to your Wi-Fi network. The temporary Blueair classic-config network is automatically terminated. Your smartphone automatically connects to your usual Wi-Fi network.

Aware

1. Set Blueair Aware to manual mode:

a. Hold your Aware upside down until the LED bar starts blinking blue from one side to the other.

b. Turn the device upright again and wait for ten seconds.

c. Turn your Aware upside down a second time. Hold it until the LED bar starts blinking orange from one side to the other.

d. Turn your Aware upright again. Blueair Aware is now in manual mode.

2. On your smartphone, navigate to 'Wi-Fi settings'. Wait for the network named 'Aware-Config' to show. Connect to it.

3. Return to the Blueair Friend app and restart the connection process by adding a new device. Skip step 1 and 2 in the app instructions.

4. When the app asks you to connect your Blueair Aware to a Wi-Fi network, fill in the name and password of the Wi-Fi network that you want to connect your Blueair Aware to.

When the LED is solid blue, your Blueair Aware air monitor is connected to your Wi-Fi network. The temporary aware-config network is automatically terminated. Your smartphone automatically connects to your usual Wi-Fi network.

Sense+

1. Unplug Blueair Sense+ and plug it back again. Sweep your hand over the top display to activate it.

2. Set the device to manual mode:

a. Press the area below the Wi-Fi symbol for 3 seconds (inside a circle, if you see it). Wait until the Wi-Fi symbol is blinking.

b. Press the same place again for 3 seconds.

When the Wi-Fi symbol is pulsing, Blueair Sense+ is in manual mode.

3. On your smartphone, navigate to 'Wi-Fi settings': Wait for the network named "Sense-Config" to show. Connect to it.

4. Return to the Blueair Friend app and restart the connection process by adding a new device.

Skip step 1 and 2 in the app instructions.

5. When the app asks you to connect your Blueair Sense+ to a Wi-Fi network, fill in the name and password of the Wi-Fi network that you want to connect your Blueair Sense+ to.

When the Wi-Fi symbol on the top display is solid, your Blueair Sense+ is connected to your Wi-Fi network. The temporary Blueair sense-config network is automatically terminated. Your smartphone automatically connects to your usual Wi-Fi network.