All the effectiveness without all the noise? When something sounds almost too good to be true you are likely to have questions. We hope to answer some of them here. If not, we'd love to help. Contact us ›
How do I change my filter?
To change the filter on a 500 or 600 series unit, remove the top of the unit to reveal the filters. Remove the top filter and then slide out the additional filters on each side. When inserting the new filters, follow the labels on the filter packaging to assure they are facing the correct way. Don’t worry about which filter is placed where, they’re all the same.
How close can I place my air purifier to the wall?
To allow the SurroundAir™ technology to work correctly, we suggest leaving 4 or more inches around the entire unit.
How many filters should I buy?
To replace the filters in your 600 series unit, you only need to purchase one filter package, containing 3 filters. The 500/600 series filters are the same and will always come with the three necessary filters.
What if one of my wheels break?
Give us a call, 1.888.BLUEAIR, and we’ll order you a new one. Broken wheels can easily be removed by simply turning the unit on its side and pulling out the wheel. A new wheel can be popped back in, in the same way.
Why does my new filter look different than my old one?
You might notice one side of your new filter is black, this is because we’ve added a sheet of activated carbon to make the unit more visually appealing and increase it’s odor and gas removal.
My ‘E’ series unit is constantly running on high while on auto. How can I fix this?
This is usually caused by the sensor being clogged. To fix the problem you will need to use a can of compressed air and give the sensor area a couple of 3 second blasts. On the 500 series units, the sensors are located in a small grate just to the right of the digital display.
How do I reset the filter timer on my Electronic unit?
To reset the filter replacement indicator on an ‘E’ series unit, press and hold the “TIMER” button for 5 seconds. The filter change indicator light will turn off and the counter will begin its countdown to the next filter change(188 days).
How do I know when I need to change the filter in my electronic unit?
The filter timer built into your electronic unit will flash an LED light to indicate when it needs to be changed.
How do I set the automatic ON and automatic OFF feature on my electronic unit?
When the unit is turned off, use the PRESET key on the remote control to set ON TIME, OFF TIME and SPEED.
Setting an ON time.
Press the PRESET key once. Set the ON TIME by using the plus (+) and minus (–) keys to add or subtract time in intervals of 30 minutes. The display will indicate the amount of time (for instance, 1 for one hour) and count down to zero, when the unit will turn itself on.
Setting an OFF time.
Press the PRESET key again. Set the OFF TIME using the plus (+) and minus (–) keys to add or subtract time in intervals of 30 minutes. The display will indicate the amount of time (for instance, 4 for four hours) until the unit will turn itself off. If ON TIME is set at 1 and OFF TIME is set at 4, the unit will turn on after 1 hour and turn off after 4 hours of operation.